4 Configuration Setting the Camera Head’s Motion Range
20
Setting the Motion Speed
Set the operation speed for pan, tilt, roll and zoom motion to one of three levels: [High], [Medium] or [Low]. The actual
speeds assigned to each speed level can be changed using the Robotic Camera Head Settings menu (A 26).
Setting the Pan Motion Range
Click [ ] or [ ] to pan left and right, respectively. The directions are
reversed in underslung mode.
1. Click [ ] to pan left until the desired end of the motion
range and then click [Left Limit] to confirm the motion limit.
2. Similarly, click [ ] to pan right until the desired end of the
motion range and then click [Right Limit] to confirm the motion limit.
3. Click [Save] to save the motion range values.
Setting the Tilt Motion Range
Click [ ] or [ ] to tilt up and down, respectively. The directions are
reversed in underslung mode.
1. Click [ ] to tilt down until the desired end of the motion
range and then click [Down Limit] to confirm the motion limit.
2. Similarly, click [ ] to tilt up until the desired end of the motion
range and then click [Up Limit] to confirm the motion limit.
3. Click [Save] to save the motion range values.
Setting the Roll Motion Range
Click [ ] or [ ] to roll counter-clockwise and clockwise, respectively.
The directions are reversed in underslung mode.
1. Click [ ] to roll counter-clockwise until the desired end of
the motion range and then click [CCW Limit] to confirm the
motion limit.
2. Similarly, click [ ] to roll clockwise until the desired end of the motion range and then click [CW Limit]
to confirm the motion limit.
3. Click [Save] to save the motion range values.
position
motion range
position
motion range
position
motion range