Cisco Systems doll VR-561 Manual

PDF Manuals
310 Pages English

Cisco Systems doll VR-561
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show csm
VR-705
Cisco IOS Voice, Video, Fax Command Reference
csm_state CSM call state of the current call (PRI line) associated with this device.
Possible values are as follows:
• CSM_IDLE_STATE—Device is idle.
• CSM_IC_STATE—A device has been assigned to an incoming call.
• CSM_IC1_COLLECT_ADDR_INFO—A device has been selected
to perform ANI/DNIS address collection for this call. ANI/DNIS
address information collection is in progress. The ANI/DNIS is
used to decide whether the call should be processed by a modem or
a voice DSP.
• CSM_IC2_RINGING—The device assigned to this incoming call
has been told to get ready for the call.
• CSM_IC3_WAIT_FOR_SWITCH_OVER—A new device is
selected to take over this incoming call from the device collecting
the ANI/DNIS address information.
• CSM_IC4_WAIT_FOR_CARRIER—This call is waiting for the
CONNECT message from the carrier.
• CSM_IC5_CONNECTED—This incoming call is connected to the
central office.
• CSM_IC6_DISCONNECTING—This incoming call is waiting for
a DISCONNECT message from the VTSP module to complete the
disconnect process.
• CSM_OC_STATE —An outgoing call is initiated.
• CSM_OC1_REQUEST_DIGIT—The device is requesting the first
digit for the dial-out number.
• CSM_OC2_COLLECT_1ST_DIGIT—The first digit for the
dial-out number has been collected.
• CSM_OC3_COLLECT_ALL_DIGIT—All the digits for the
dial-out number have been collected.
• CSM_OC4_DIALING—This call is waiting for a dsx0 (B channel)
to be available for dialing out.
• CSM_OC5_WAIT_FOR_CARRIER—This (outgoing) call is
waiting for the central office to connect.
• CSM_OC6_CONNECTED—This (outgoing) call is connected.
• CSM_OC7_BUSY_ERROR—A busy tone has been sent to the
device (for VoIP call, no busy tone is sent; just a DISCONNECT
INDICATION message is sent to the VTSP module),and this call is
waiting for a DISCONNECT message from the VTSP module (or
ONHOOK message from the modem) to complete the disconnect
process.
• CSM_OC8_DISCONNECTING—The central office has
disconnected this (outgoing) call, and the call is waiting for a
DISCONNECT message from the VTSP module to complete the
disconnect process.
Table 34 show csm voice Field Descriptions (continued)
Field Description
Table of Contents
Expand All
Related Manuals for Cisco Systems doll VR-561