Working with the Tablet PC
Wireless LAN/Bluetooth/UMTS/LTE/NFC
radio components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for t his device.
Switching the wireless components on and off
The wireless components are switched on and off via the corresponding operating system functions.
► To individually switch off an d on the wireless components, select Settings –
Change PC settin gs – N etwo rk – Airpla n e mode.
Setting up WLAN access
• Requirement: A W LAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating s ystem.
NFC
Your Tablet P is optionally equipped with an integrated NFC chip. Near Field Co mmunication
allows a c ontactless, wireless exchange of data at a short distance (a few centemetres).
Access via U
MTS / LTE
If you ordered an integrated UMTS / LTE module with your system , you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS / LTE module is ready for use straight aw ay.
If you did not order a UMTS / LTE module, you can purchase the accessories for U MTS /
LTE reception from your retailer or your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS / LTE network
in the documentation for the hardware used.
Your device can connect to the Internet via UMTS / LTE. To do this, use one
of the following types of connection:
• Integrated U M TS / LTE module (availability dependent on your model variant)
•aUSBd
ongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
44 Fujitsu