Zanussi tumble dryer ZTH 485 Manual

PDF Manuals
60 Pages English

Zanussi tumble dryer ZTH 485
Abnormally
elapsing time
on the LCD
5)
Time to end is calculated on the basis of:
type, volume and dampness of laundry.
Automatic process; this is not a machine
fault.
Programme in-
active
Full water reservoir.
Empty water reservoir
3)
, press START
PAUSE button.
Drying cycle to
short
Small laundry volume./Too dry laundry for
selected programme.
Select time programme or higher drying lev-
el (e.g. EXTRA DRY ).
Drying cycle to
long
6)
Fluff filters clogged. Clean fluff filters.
To high loading volume. Respect max. loading volume.
Laundry insufficiently spun. Spun adequately the laundry.
Particularly high room temperature - no ma-
chine fault.
Lower the room temperature if possible.
1) In case of error message on the LCD (e.g. E51- only dryers with the LCD): Switch the dryer off and on. Set
programme. Press the START PAUSE button. Does not work? - inform local service and quote the error
code.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaningchapter
4) see Machine settings chapter
5) only dryers with the LCD
6) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).
Technical data
Dimensions (mm) Width / Height / Depth 85 x 60 x 58 cm
Max. depth
(with the appliance door open)
109 mm
Max. width
(with the appliance door open)
950 mm
Electrical connection Voltage 230 V
Frequency 50 Hz
Fuse 6 A
Total power 1050 W
Drum volume 108 l
Weight of the appliance 50,5 kg
Laundry: max. weight 7 kg
Type of use Household
Ambient temperature Min. 5 °C
Max. 35 °C
Energy consumption
1)
kWh/cycle 2,04 kWh
Annual energy consumption
2)
251 kWh
Energy efficiency class A+
Power consumption Left-on mode 0,68
27
www.zanussi.com
Related Manuals for Zanussi tumble dryer ZTH 485