®
● Switch selectable (see chart below) DC voltage output.
● Regulated and filtered output voltage.
● Switches to backup battery automatically in case of power loss.
● Short circuit protection.
● Built-in backup battery charger.
Four Models to Choose From
Model #
ST-1206-1.5A
ST-2406-2A
ST-2406-3A
ST-2406-5A
Voltage (DC)
Current Current (peak)
6,12
6,12,24
6,12,24
6,12,24
1.5A
1.5A
2.5A
4.0A
2.0A
2.0A
3.0A
5.0A
●
Triggered by positive voltage (+DC), closure of dry contact, or
opening of dry contact.
●
Set from 1 sec. to 60 min.
●
Relay programmable to activate at start or end of timing cycle.
●
Relay programmable for pulse (flash) activation.
●
Built-in reset function.
●
Form-C relay, contacts rated 8A @ 120VAC/24VDC.
●
LED indicator.
●
12/24VDC (auto sensing).
●
Low current drain.
●
2
7
/
8
" x 2
1
/
2
" (73 x 63 mm).
SA-025
Power input
Current drain
Relay type
Contact ratings
12/24VDC (auto sensing).
Low
Form-C relay
8A @ 120VAC/24VDC.
Model Number:
Relay type:
Relay contact ratings:
Supply Voltage:
Current draw:
Programmable 6/12/24VDC,
default at 12VDC
70mA @ 12-24VDC
100mA @ 6VDC
SR-2224-C5
ENFORCER
Relay Module
Specifications:
Tel: 1-800-662-0800 (Domestic U.S. & Canada) Tel: 1-949-261-2999 (California & international)
Fax: 1-949-261-7326 Email: info@seco-larm.com Website: www.seco-larm.com
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
RelayModuleb.p65
SR-2224-C5
DPDT, Form-C dry contacts
5A @ 250VAC/30VDC
®
ENFORCER
Power Supplies
®
ENFORCER
Timer Modules
Red LED - lights to show
relay is energized
2 Jumpers to
program
input voltage
(6,12,24V)
Input terminals to energize relay
Connection Diagram
Two separate sets of Form-C contacts
6V 12V 24V
JP1 ON ON OFF
JP2 ON OFF OFF
Preset 12V
+/- 20% of operating voltage
2.76" x 1.89" x .79"
(70 x 48 x 20mm)
1.94 oz. (55 g)
Foam tape (included)
Minimum pull voltage
Size
Weight
Mounting method:
Features:
••
••
•
Two separate sets of Form-C dry contacts.
••
••
•
Perfect for a variety of general switching purposes.
••
••
•
Can be connected for load switching, dry contact, latching
output, reverse polarity, line seizure, and other uses.
••
••
•
6/12/24 VDC operation, programmable by on-board
jumpers.
••
••
•
Red LED indicates relay is energized.
••
••
•
Large terminal blocks for easy installation.
••
••
•
Small size, easily fits inside alarm panel enclosures
or other hidden areas.
••
••
•
Foam mounting tape included.
England 
Deutschland 
France 
Italia 
Polska 
United Kingdom 
Россия 
Nederland 
España 
Magyarország 
Sverige 
România 
Portugal 
Colombia 
Suomi 
New Zealand 
Česká republika 
Türkiye 
Danmark 
日本